Filter
Top Products
49
4.5 Service
This option is used to restore printer settings to defaults and display printer
mileage information
4.5.1 Initialization
The printer settings are restore to defaults as below once printer is initialized.
Parameter
Default setting
Speed
50mm/sec (2 ips)
Density
7
Label Width
2.83"(72.0mm)
Label Height
2.5"(63.4mm)
Sensor Type
Gap sensor
Gap Setting
0.12"(3.0mm)
Print Direction
0
Reference Point
0,0(upper left corner)
Offset
0
Tear Mode
On
Peel off Mode
Off
Serial Port Settings
9600 bps, none parity, 8 data bits, 1 stop bit
Code Page
850
Country Code
001
Clear Flash Memory
No
Shift
0
Gap Intension
Will be reset. Need to re-calibrate the gap
Service
Initialization
-
Mileage Info.
-
Exit
Initialization
Mileage Info.
]