Tyco 1540 Switch User Manual


 
Press to return to the Reset screen.
Press >> to reset the selected reading(s). The next screen will
appear.
3.10 Pulsed Output, Pulse Duration
This applies to the Relay Pulsed Output option only. Units with this option provide pulses to
indicate power consumption (kWh). See Section 1.6 pulse output option.
This screen allows the user to set the duration of the relay output pulse. The value displayed
represents the pulse duration in milliseconds (ms). On a two part DIS 1540/Integra 1560, this
screen will set the pulse duration for the Kvarh pulse relay (where fitted) also.
To retain the current setting, press >>. The next Set-up screen
will appear.
To change the pulse duration, press .
Use the key to scroll through the available values of 60, 100
and 200.
Select the value required and press >> to confirm your
selection. The confirmation screen will appear.
To change the value again, press . The Edit screen will
reappear.
To accept the displayed pulse duration, press >>. The next
screen will appear. Depending on the model, this may take you
out of the Set-up screens and back to the last selected Display
screen.
29
Integra 1540, 1000, 0640, 0440, 0340, 0240 Issue 1 04/03
Confirmation
Edit
Confirmation
0240 0340 0440 0640 1000 1540 Option