Filter
Top Products
55
Programming/Editing Optional Settings
Notes:
• The default setting is Off.
• See “What is CTCSS/DCS?” on Page 16 for a
complete list of CTCSS and DCS tones.
Setting the Channel Frequency
Modulation
Program System
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Set Moduration
Auto - the scanner uses the default modulation for
the frequency band.
AM - the scanner uses AM (amplitude modulation) for
the frequency band.
FM - the scanner uses FM (frequency modulation) for
the frequency band.
NFM - the scanner uses narrowband FM for the
frequency band.
WFM - the scanner uses wideband FM for the
frequency band.
WFM (Broadcast)- the scanner uses WFM
Broadcast for the frequency band.
Note: The default setting is Auto.
This setting controls the modulation method used for
the frequency band. In most cases, if you leave this
set to Auto, the scanner automatically selects the
correct modulation type for the system you are
programming.
Menu