Filter
Top Products
56
Setting Channel Attenuation
Program System
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Set Attenuator
This setting controls whether the scanner attenuates
signals on this channel. Select your setting, then press E.
On - the channel is attenuated by about 25 dB.
Off - the channel is not attenuated.
Notes:
• The default setting is Off.
• You can also toggle this setting by holding on the
channel and pressing and E.
Setting Channel Lockout
Program System
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Set Lockout
This setting determines whether the scanner will scan
this channel when its system and group are enabled.
Select your setting, then press E.
Lockout - the channel is not scanned.
Unlocked - the channel is scanned.
Menu
Func
Menu