Filter
Top Products
74
Off - the scanner remains on the channel until the
transmission stops.
Notes:
• If you are trying to test the Close Call feature with
a nearby transmitter and you do not talk into the
transmitter, the scanner will detect this as data
and will skip the frequency when Data Skip is on.
Turn the feature off or talk into the transmitter.
• This setting is ignored for AM/WFM/FMB
channels.
• The default setting for this feature is Off.
Setting the Delay Time
Srch/CloCall Opt
Set Delay Time
This setting determines how long the scanner waits
after a transmission ends before resuming quick
search or Close Call operation. Select your setting,
then press the scroll control.
Off The scanner resumes immediately when the
transmission ends.
1-5 sec The scanner waits the set amount of time
after the transmission ends before resuming.
Note: The default setting is 2 sec.
Setting the Search Frequency Step
Srch/CloCall Opt
Set Step
This setting selects the frequency step used for setting
the channels. Select your setting, then press the scroll
control.
Auto The step is based on the band (see the table at
the front of the manual)
Menu
Menu