Filter
Top Products
67
Using the Close Call Feature
CC DND (Do Not Disturb) - The scanner checks
for a Close Call hit every 2 seconds only if the
scanner is not currently stopped on a transmis-
sion. If the scanner is on a transmission the
scanner waits until the signal ends to perform a
Close Call check. This prevents breaks in audio
during Close Call checks.
CC PRI - Close Call works even if there is a
transmission. Checks for a Close Call hit every
2 seconds.
Off - Close Call is turned off for all mode.
Note:You can also toggle this setting by
pressing then
• Set CC Override: Lets you select how the
Close Call feature works with other scanning
activities.
On -If the scanner detects a Close Call
frequency, CC Found! and Press Any Key
appear, and the Close Call frequency is dis-
played by pressing any key while it is detecting.
Off - If the scanner detects a Close Call
frequency, CC Found! and “E” to Listen
appear for the period which you have set at
Set CC Pause (See page 68). Press E to
display the Close Call frequency during that
period.
Turn the scroll control to display an option, then
press the scroll control.
• Set CC Alert: Lets you select how the
scanner alerts you when it receives a Close
Call signal. You can select any of the following
options.
Select Mode
• Beep (the scanner beeps when it receives
a Close Call signal)
• Light (the backlight turns on when it
receives a Close Call signal)
Func