Filter
Top Products
101
Call mode and stores any Close Call hits, up to the maximum you specified in the
setting. If the scanner stores more hits than this setting, it stops
auto store operation.
Turn the Scroll Control to display an option, then press .
— Lets you select the Close Call mode. If you set or
, then every 2 seconds the scanner switches the filter settings to the ones set by
the CC Bands option.
— Close Call is turned off for all modes.
(Do Not Disturb) — The scanner checks for a Close Call hit every 2
seconds only if the scanner is not currently stopped on a transmission. If the
scanner is on a transmission the scanner waits until the signal ends to perform a
Close Call check. This prevents breaks in audio during Close Call checks.
(Priority) — Checks for a Close Call hit every 2 seconds.
— Lets you select how the Close Call feature works with other
scanning activities. If you turn this option off, when the scanner detects a Close Call
signal, appear for the time you set in
. Press when this appears to jump to and hold on the frequency.
If this option is turned on, the scanner overrides the current channel and goes to the
Close Call hit. The scanner displays . When you
press a key, the frequency appears.
— Lets you select how the scanner alerts you when it receives a
Close Call signal. You can select from these options.
— The scanner beeps when it receives a Close Call signal. You can
set the beep alert in the following manner.
— the scanner does not beep
— The scanner sounds a specialized beep to notify you of a Close Call
hit. When you select an alert type, the scanner automatically enters the setting of the
Alert volume level. Each alert has a unique one or sound pattern.
— Lets you select how long the scanner waits after a hit before it
returns to the previous operation. Your options are:
.
— The scanner stops and requires you to manually select another
operation to enable its return.
Max Auto Store
Q
Set CC Mode CC DND CC
Pri
Off
CC DND
CC Pri
Set CC Override
CC Found! Press Func Key Set CC
Pause
CC Found! Press Any Key
Set CC Alert
Select Beep
Off
Alert 1-9
Set CC Pause
3/5/10/15/30/45/60 sec
Infinite
!