Filter
Top Products
97
Set Attenuator
Set Record
Assigning a Search Range to a Search Key
Saving a Found Channel (Quick Save)
Qg
Qg
gQ g
Qg
Qg
Qg
to select to choose an attenuation for all frequencies in the range.
— the frequencies are attenuated.
— the frequencies are not attenuated.
to select to enable a live audio output from to an audio recording device.
— the scanner outputs the signal.
— the scanner does not output any audio.
You can assign any of the Service or Custom Searches to the six Search keys for
quick access to your favorite searches.
Select the key to assign
Select a search range
Now, to access that search, hold on any channel, then press and the number
key to corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Police
SRCH 3: Railroad
SRCH 4: Marine
SRCH 5: TV Broadcast
SRCH 6: FM Broadcast
Press to save a channel’s frequency if you hold on a channel or detect a
channel, instead of using Direct Entry at another time. The alpha data is also stored.
If a GPS unit is attached, the longitude and latitude data is saved and also becomes
the name of the channel. For example, if the position is latitude and
longitude, the name saved is .
On
Off
On
Off
Search for ...
Set Search Key
REC
[MENU]
[1] [6]
[E ]
32°57’33.60 N
97°05’34.18 W 3257.33-09705.34
YES