Filter
Top Products
110
[MENU]
[PRI]
[MENU]
— The automatic adjust feature is enabled.
— you can set the threshold manuals depending on your circumstances.
— sets the factory default value.
If you activate a Priority Scan while scanning, the radio interrupts its scan every two
seconds to check the priority channel (P-Ch). appears on the screen.
There are two ways to set Priority Scan.
1. Press to set one of the following Priority Scan levels in Scan / Scan Hold
mode.
— Normal scanning. The scanner provides no special treatment for Priority
Channels.
— The scanner scans all unlocked channels and also checks those designated
as Priority. While scanning a conventional system, the scanner interrupts every 2
seconds and checks the priority channels in each unlocked conventional system.
Priority channels in lower priority key numbered systems (starting from 1) have
highest priority. appears when you select this mode.
— The scanner only scans priority channels in unlocked conventional
systems. flashes when you select this mode.
2. You can choose how the scanner treats Priority Channels using the Menu
options.
Choose or
gQ g
g
gQ g
g
Q
Q
Srch/CloCall Opt
Adjust P25 Level
Auto
Manual
Default
PRI
Off
On
PRI
Plus On
PRI
Set Priority
Off, On, Plus On
Priority Scan