Filter
Top Products
3-30 Installation and Replacement
Modifying Your Vanguard 6435/6455
Figure 3-15. Installing/Removing a Vanguard 6455 Option Card
Install an Option Card
Locate the option card slot you want to use
and remove the filler panel by loosening the
captive screws.
Carefully slide the option card into the card
guides within the opening. Press into place,
making sure the edge connectors seat
properly.
On either side of the option card, tighten the
two captive screws.
1
2
3
Remove an Option Card
Locate the option card you want to remove
and loosen the captive screws.
Carefully slide out the option card.
1
2