Filter
Top Products
Installation and Replacement 3-13
Installing The Vanguard 6435/6455
This table shows the pinouts for RJ-45 connectors for Ports 3 and 4:
Note
Use Ports 3 and 4 only with low speed asynchronous protocols. Running
asynchronous protocols at speeds greater than 19.2 kbps may degrade node
performance.
Port 5
This table shows the pinouts for the RJ45 Ethernet connector for Port 5:
Pin Number Port 3/Port 4 (CTP)
Signal DCE
1 RTS Input
2 DTR Input
3 RXD Output
4DCDOutput
5 GND -------
6 TXD Input
7DSROutput
8CTSOutput
Pin Signal
1 Transmit Positive
2 Transmit Negative
3 Receive Data Positive
4Not Used
5Not Used
6 Receive Data Negative