Filter
Top Products
UGT-ST310R Page 14
2. Select Delete RAID Set, then press Enter.
3. Select the RAID set then press Enter.
4. When asked Are You Sure(Y/N)?, press Y to confirm.
Resolving Conflicts
When a RAID set is created, then metadata written to the disk
includes drive connection information. If, after a disk failure, the
replacement disk was previously part of a RAID set (or used in
another system), it may have conflicting metadata. If so, this will
prohibit the RAID set from being either created or rebuilt, in
order for the RAID set to function properly, this old metadata
must be first overwritten with the new metadata. To resolve this,
from the main BIOS window select Resolve Conflicts, then
press Enter, the correct metadata, including the correct drive
connection information, will be written to the replacement disk.
Low Level Format
Low Level Format is build into the RAID BIOS to make it more
convenient to erase the entire contents of a hard disk drive,
including data, drive and partition information. The Low Level
Format utility works on single hard drive only, before the RAID
set is configured.
Logical Drive Info
This menu item allows the display of the assignment of physical
drives within a logical set (RAID0, RAID1, etc.). This is display
only function.