Filter
Top Products
MX800 SERIES INSTALLATION GUIDE 11
VeriFone also recommends instruction of the cardholder regarding safe PIN-entry.
This can be done with a combination of:
• Signage on the PED
• Prompts on the display, possibly with a “click-through” screen
• Literature at the point of sale
• A logo for safe PIN-entry process
Installing
Optional
Components
This section discusses the installation procedures for the optional components
available for the MX800 Series terminal. Your terminal may already have some of
these options, as modules can be installed at the factory or in the field.
Installing
Countertop Wedge
The countertop wedge raises the rear section of the MX800 Series terminal by an
angle of 10 degrees to facilitate use of the screen (Figure 3).
Figure 3 Countertop Wedge: Rear View of the MX800 Series Terminal
To install the
countertop wedge
1 Align the pins in the countertop wedge with the two key holes on the bottom
of the MX800 Series terminal (Figure 4).
2 Slide the countertop wedge firmly into position.
Table 4 Mounting Methods and Protection Measures
Method Cashier
Customer In
Queue
Customers
Elsewhere
On-Site
Cameras
Countertop
without stand
Use signage
behind the
PED
Install so that
customer is
between PED and
next in queue
No action
needed
Do not install
within view of
cameras
Countertop
with stand
No action
needed
Install so that
customer is
between PED and
next in queue
No action
needed
Do not install
within view of
cameras