Filter
Top Products
30
Wireless DSL Gateway User Manual
31
Chapter 5 Configuring Advanced Settings
We strongly recommend leaving the DHCP Server option On. If the DHCP Server
option is Off, ensure the IP addresses of the networked computers are on the same
subnet as the IP address of the Gateway. For more information, see “DHCP Server
Configuration.”
DHCP Server Configuration
Clicking in the check box labeled “I would like to adjust the DHCP server settings”
activates the text boxes at the bottom of the DHCP Settings screen. Change the IP
address range and DNS server information in these text boxes.
Beginning IP Address
This is the IP address at which the DHCP server starts assigning IP addresses. We
recommend keeping the factory default setting (192.168.1.64).
Ending IP Address
This is the IP address at which the DHCP server stops assigning IP addresses. We
recommend keeping the factory default settings (192.168.1.254).
The beginning and ending IP addresses define the IP address range of the
Gateway. If the default values are left intact, the Gateway supplies a unique IP
address between 192.168.1.64 and 192.168.1.254 to each computer on the net-
work. Note that the first three groups of numbers of the addresses are identical;
this means they are on the same subnet. The IP address of the Gateway must
be on the same subnet as the IP address range it generates. For instance, if the
Gateway’s IP address is changed to 10.33.222.1, set the beginning IP address to
10.33.222.2, and the ending IP address to 10.33.222.254.
Subnet Mask
Enter the IP address of the DHCP server’s subnet mask here.
Lease Time
This value represents the amount of time (in seconds) the DHCP server holds
onto a specific IP address.