Filter
Top Products
32
Wireless DSL Gateway User Manual
33
Chapter 5 Configuring Advanced Settings
The values in the “Modem IP Address” and “Modem Subnet Mask” text boxes are
the IP and subnet mask address of the Gateway as seen on the network. These val-
ues can be modified for your LAN network, but we recommend keeping the default
factory settings (IP address 192.168.1.1; subnet mask address 255.255.255.0).
☞
Note: If the Gateway’s LAN IP Address is modified, verify the
DHCP Server range is within the same subnet. For more infor-
mation, see “DHCP Server Configuration.”
When finished in this screen, click Apply to activate any changes made.
WAN IP Address
Selecting WAN IP Address in the “Advanced Setup” screen causes a warning
screen to appear.
Read the on-screen warning, then click Yes to continue.