Filter
Top Products
Installation
24 Vidikron Vision Model 110 Owner’s Operating Manual
PRE
L
IMINAR
Y
Remove Projector Front Feet: Place the
projector upside down on a blanket or
other soft surface. Loosen and remove the
two front feet on the projector.
Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the adapters
bring the attachment points for the projector mounting rails (included with the projector
ceiling mount kit) from the bottom of the projector up and around the AutoScope lens motor
housing. For floor installations (where the projector is upright), the adapters allow the
projector to lie flat on the mounting surface.
Using six (6) each of the supplied, M6 x 12mm Pan-Head Phillips screws (item #2), attach the
AutoScope Ceiling Mount Adapters/Projector Stands (items #3 and
#4) to the projector as
shown in
Figure 3-7.
Remove