Filter
Top Products
Operation
Vidikron Vision Model 110 Owner’s Operating Manual 49
PRE
L
IMINAR
Y
Picture Use the controls in the Picture Menu to calibrate your Vision 110 for optimum picture quality.
The Vision 110 has been designed to incorporate setup and calibration standards established
by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,
industry-recognized standards for optimal video performance and has implemented a
training program for technicians and installers to use these standards to obtain optimal
picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that
setup and calibration be performed by an ISF certified installation technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately.
Cinema CINEMA Select Cinema to view 2.35 source
material in its native aspect ratio.
With a 16:9 screen and a
non-CineWide projector (no
anamorphic lens), the upper and
lower portions of the screen are
masked, but the geometry of the
active image area is unchanged.
With a 2.35:1 screen and a
CineWide-equipped projector,
the Vision 110 scales the 2.35:1
image so that the active image
area fills the 16:9 chip surface,
eliminating the black bars. The
secondary, anamorphic lens then
restores the proper geometry to
the 2.35:1 image.
IntelliWide 2.35 IWIDE
2.35
A 16:9 image is scaled
NON-linearly (more on the sides
than in the center) to fit a 2.35:1
screen.
IntelliWide 2.35 is available only
on the Vision 110/CineWide.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio
Remote
Control
Key
Description
2.35:1 Image on
16:9 Screen
(Cinema aspect ratio / no CineWide)
2.35:1 Image on
2.35:1 Screen
(
Cinema aspect ratio / CineWide)
16:9 Image on
2.35:1 Screen with
Intelliwide 2.35
16:9 Image on
2.35:1 Screen
16:9 Image on
2.35:1 Screen
Picture
Brightness
Contrast
Color
Tint
Sharpness
When you change a picture quality setting, save the change to a preset
afterwards. Otherwise, the change will be lost when a different input is
selected. (Picture quality settings are saved for each input separately.) For
information about saving settings, refer to
ISF Presets on page 54.
Note