Vidikron Vision 15 Projector User Manual


 
Controls and Functions
Vidikron Vision Model 15 Installation/Operation Manual 9
1. ON / OFF
Press to turn the projector on or off.
2. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
3. Source Selection Buttons:
VIDEO
Press to switch to the Composite video input.
S-VIDEO
Press to switch to the S-Video input.
COMP
Press to switch to the Component (480i/480p/576i/576p/720p/1080i/1080p) video
input.
DVI-A
Press to switch to the DVI-A input.
DVI-D
Press to switch to the DVI-D input.
HDMI
Press to switch to the HDMI input.
4. Aspect Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
16:9
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4:3
Scales the input signal to fit 4:3 display mode in the center of the screen.
LETBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
I-WIDE (IntelliWide 2.35 – Vision 15ET/CineWide only)
Selects the IntelliWide 2.35 aspect ratio, used for viewing 16:9 source material on a 2.35:1
screen.
5. DEF
Press to restore factory-default settings for the current source.
6. ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
7. ENTER
Press to select a highlighted menu item or confirm a changed setting.