Vidikron Vision 15 Projector User Manual


 
Installation
Vidikron Vision Model 15 Installation/Operation Manual 29
Connecting 12-Volt Trigger
Output to External Theater
Equipment
If your home theater contains a retractable screen, screen mask or other 12-volt
trigger-activated equipment, connect it to the 12-volt trigger output as shown in
Figure 3-14.
Figure 3-14. Connecting the 12-Volt Trigger Output to Other Equipment
3.7
Turning on the Power
1. Turn on your source components.
2. Plug the female end of the power cord into the
AC receptacle on the rear of the Vision 15 (AC
100V ~ 240V). (The Vision 15 ships with various
types of AC power cords. Choose the one that is
appropriate to your locale.)
3. Connect the other end to your AC power source.
The power indicator lights blue to indicate that
the Vision 15 is in “standby” mode.
4. Press the ON button on the remote control to
turn on the projector. The power indicator turns
off.
5. After a brief warm-up period (approximately 10 seconds), the Vision 15 will start
projecting.
Retractable Screen
or other, 12-volt
trigger-activated equipment
Red = +12V (Tip)
Black = Ground (Sleeve)
3.5-mm
mini plug