Filter
Top Products
Vidikron Vision Model 15 Installation/Operation Manual 53
5.1
Cleaning the Projector
• Unplug the power cord before cleaning the
projector.
• Avoid using benzene or thinner, as these can
damage the finish on the projector exterior.
• Do not use volatile agents, such as insecticides,
on the projector.
• Do not leave rubber or plastic objects in contact
with the projector for long periods as they may
damage the finish of the projector.
• Wipe off dirt gently with a soft flannel cloth.
• For hard-to-remove dirt, soak a cloth in a
neutral detergent diluted with water, wring the
cloth well and then wipe the projector.
• Strong cleaning detergents may discolor, warp
or damage the coating on the projector. Make
sure to test on a small, inconspicuous area on
the projector before using.
5.2
Cleaning the Lens
• Use a commercially available blower or lens
cleaning paper (for glasses and camera lenses)
for cleaning the lens. Do not use any liquid
cleaning agents, as they may wear the coating
film on the surface of the lens.
• The surface of the lens is easily damaged. Do
not scrape or hit the lens.
5Maintenance and Troubleshooting