Filter
Top Products
Operation
Vidikron Vision Model 15 Installation/Operation Manual 51
Save Settings: To store changes to picture quality settings for the current input and
resolution in the “Custom,” “ISF Day” or “ISF Night”
Picture Memory, choose Save Settings
from the Picture Adjust menu and select “Custom,” “ISF Day” or “ISF Night.” To recall this
preset at a later time, select it from the Picture Memory menu (see page 37) or press the
corresponding button on the remote control (see Figure 2-3).
For more information about this command, refer to Save Settings on page 41.
Blue Image: This feature, when enabled, removes all red and green color information from
the image (simulating a blue filter), and is useful for color-calibrating the projector or other
video components.
Splash Screen Timer: This timer controls how long the start-up (ISF and Vidikron logo)
image stays on-screen after you turn on the projector. The choices are 0, 5, 15 or 60 seconds.
To disable the splash screen, set the
Splash Screen Timer to 0.
Reset to Defaults: Refer to Reset to Defaults on page 41.