Filter
Top Products
10 ViewSonic ND4210w
3. PUT BATTERIES IN REMOTE CONTROL
Remove the back cover from the remote control as shown below. Put two AA batteries in
the remote control. Be sure to match the positive end of the battery with the positive end of
the compartment. Put the cover back on the remote control.
4. LOGIN
Open an Internet Browser, i.e., Internet Explorer on a PC in the same network. In the
URL address field, type the IP address of the ND4210w noted in a previous step > press
Enter. The Login screen appears. Type the defaults Login: admin and Password:
admin. For security purposes, we recommend that you change the default IP address,
Login and Password. For more information, see the Security section in this user guide.
After logging in successfully, the Network Configuration screen appears as shown on
the next page. Note: The ND4210w automatically logs you out after fives minutes of
inactivity.
For information on how to change network settings on an OS other than Windows, please
consult the OS user guide or your Network Administrator.
Downloaded From TV-Manual.com Manuals