Filter
Top Products
ViewSonic ND4210w 17
TAS CONFIGURATION
This screen works in conjunction with TAS. (TAS software can be purchased through Tivella at
www.tivella.com or through an authorized Tivella dealer/reseller.) Click Management > TAS. The
screen shown below appears.
1. In the Timeout (sec) field, type the number of seconds for the ND4210w to access TAS.
2. In the IP Address field is a valid DNS name automatically generated by TAS when
connected to a network but empty when used as a standalone.
3. If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save Configuration >
click Save.
Downloaded From TV-Manual.com Manuals