Filter
Top Products
ViewSonic 22 PJ513D/PJ513DB
Optimizing the image
Selecting a preset mode
The projector is preset with several predefined
picture modes so that you can choose one to
suit your operating environment and input
source picture type.
To select a operation mode that suits your need,
you can follow one of the following steps.
• Press MODE/ENTER on the remote control
or projector repeatedly until your desired
mode is selected.
•Go to the PICTURE > Preset Mode menu
and press / to select a desired mode.
The preset modes available for different types of signals are listed below.
PC Signal Input
1. Brightest Mode (Default): Maximizes the brightness of the projected image. This
mode is suitable for environments where extra-high brightness is required, such as
using the projector in well lit rooms.
2. Presentation Mode: Is designed for presentations. The brightness is emphasized in
this mode to match PC and notebook coloring.
3. Photo Mode: Maximizes the purity of RGB colors to provide true-to-life images
regardless of brightness setting. It is most suitable for viewing photos taken with an
sRGB compatible and properly calibrated camera, and for viewing PC graphic and
drawing applications such as AutoCAD.
4. Cinema Mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
5. User 1/User 2 Mode: Recalls the settings customized based on the current available
preset modes. See "Setting the User 1/User 2 mode" on page 23 for details.
YPbPr/S-Video/Video Signal Input
1. Brightest Mode: Is suitable for playing gamebox-based video games in a normal
living room lighting level environment.
2. Standard Mode (Default): Is appropriate for viewing colorful movies, video clips
from digital cameras or DVs.
3. Cinema Mode: Is suitable for enjoying dark movies or DVD movies best viewed in a
blackened (little light) home cinema or lounge room environment.
4. User 1/User 2 Mode: Recalls the settings customized based on the current available
preset modes. See "Setting the User 1/User 2 mode" on page 23 for details.