ViewSonic PJ513DB Projector User Manual


 
ViewSonic 26 PJ513D/PJ513DB
Freezing the image
Press the FREEZE button on the remote control to freeze
the image. The word 'FREEZE' will display in the upper left
corner of the screen. To release the function, press any button
on the projector or remote control.
Even if an image is frozen on the screen, the pictures are
running on the video or other device. If the connected
devices have active audio output, you will still hear the audio
even though the image is frozen onscreen.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between
1500 m –3000 m above sea level, and temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature
is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under
such condition.
To activate the High Altitude Mode, go to SYSTEM SETUP: Advanced > High
Altitude Mode, select On by pressing / on the projector or remote control. A
confirmation message displays. Highlight Yes and press MODE/ENTER.
Operation under "High Altitude Mode" may cause a higher decibel operating noise
level because of increased fan speed necessary to improve overall system cooling and
performance.
If you use this projector under other extreme conditions excluding the above, it may
display auto shut-down symptoms, which is designed to protect your projector from
over-heating. In cases like this, you should switch to High Altitude mode to solve these
symptoms. However, this is not to state that this projector can operate under any and
all harsh or extreme conditions.
We recommend you use the High
Altitude Mode by selecting it whenever
your environment is higher than 1500 m.
Do you want to turn the High Altitude
Mode on?
Yes
No
Notice