Filter
Top Products
ViewSonic 28 PJ513D/PJ513DB
Shutting down the projector
1. Press Power and a
confirmation message will
display prompting you.
If you don't respond in a few
seconds, the message will
disappear.
2. Press Power a second time.
The Power indicator light
flashes orange, the projection
lamp shuts down, and the fans
will continue to run for
approximately 90 seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling
process.
3. The Power indicator light is a steady orange
and fans stop. Disconnect the power cord from
the wall socket.
• Do not unplug the power cord before the
projector shutdown sequence is complete or
during the 90-second cooling down process.
• If the projector is not properly shut down, to
protect the lamp, when you attempt to re-start the
projector, the fans will run for a few minutes to
cool down. Press Power again to start the
projector after the fans stop and the Power
indicator light turns orange.
POWER OFF
Press button
again to power off
Press any button to cancel