Filter
Top Products
ViewSonic 3 PJ513D/PJ513DB
Controls and functions
Projector
1. Focus ring
Adjusts the focus of the projected image.
See "Fine-tuning the image size and
clarity" on page 19 for details.
2. Zoom ring
Adjusts the size of the image. See "Fine-
tuning the image size and clarity" on page
19 for details.
3. Power/Power indicator light
Toggles the projector on or off.
See "Start up" on page 17 and "Shutting
down the projector" on page 28 for
details.
4. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 19
for details.
5. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 18 for
details.
6. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu.
Goes back to previous OSD menu, exits
and saves menu settings.
See "Using the menus" on page 31 for
details.
7. Temperature warning light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 42 for details.
8. Keystone/Arrow buttons ( / Up,
/Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 20 for
details.
9. Lamp indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 42 for
details.
1
6
3
2
57
4
8
9
10
11
8
12