Filter
Top Products
9
Operating the LASER pointer
The Laser Pointer is a presentation aid for professionals. It emits colored light when you
press it. The laser beam is visible. It is necessary to press and hold Laser for continuous
output.
Do not look into the laser light window or shine the laser light beam on yourself or others. See
the warning messages on the back of the remote control prior to using it.
The laser pointer is not a toy. Parents should be mindful of the dangers of laser energy and
keep this remote control out of the reach of children.
Remote control code
The projector can be assigned to 8 different remote control codes, 1 to 8. When several
adjacent projectors are in operation at the same time, switching the remote control codes
can prevent interference from other remote controls. Set the remote control code for the
projector first before changing that for the remote control.
To switch the code for the projector, select from among 1 to 8 in the SYSTEM SETTING:
ADVANCED > Remote Control Code menu.
9. Mouse
Switches between the normal and mouse
modes.
PgUp, PgDn, , : active after pressing
Mouse. An icon appears on the screen to
indicate the activation of the mouse mode.
Only available when a PC input signal is
selected.
10. (Panel Key Lock)
Activates panel key lock.
11. (Presentation Timer)
Displays the presentation timer settings
menu.
12. (Volume)
Displays the volume adjustment bar.
13. Eco Mode
Selects a lamp mode.
14. LED indicator
15. (My Button)
Allows user to define a short cut key on the
remote control, and the function item is
selected in OSD menu.
16. Source
Displays the source selection bar.
17. Laser
Emits visible laser pointer light for
presentation purposes.
18. Exit
Goes back to previous OSD menu, exits
and saves menu settings.
19. PgUp (Page Up)/PgDn (Page Down)
Operates your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint) when the mouse mode is
activated.
Only available when a PC input signal is
selected.
20. Pattern
Displays embedded test pattern.
21. Blank
Hides the screen picture.
22. (Help)
Displays the HELP menu.
23. (Mute)
Toggles the projector audio between on
and off.
24. (Zoom)
Displays the zoom bar that magnifies or
reduces the projected picture size.
25. Color Mode
Selects an available picture setup mode.
26. Audio Mode
Selects an audio mode.