Filter
Top Products
54
Function Description
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up.
Screen Capture
See "Creating your own startup screen" on page 37 for
details.
My Button Sets a hotkey on remote control.
Advanced
Pattern
The projector can display several test patterns. It helps you
adjust the image size and focus and check that the projected
image is free from distortion.
Message
Selecting On displays the current information on the screen
when the projector is detecting or searching for a signal.
Presentation Timer
See "Setting the presentation timer" on page 35 for details.
High Altitude
Mode
A mode for operation in high altitude areas. See "Creating
your own startup screen" on page 37 for details.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting On enables the function and the
projector will automatically switch the lamp mode between
normal and economic modes according to the input image
detected.
This function is only available when a PC input signal
is selected.
After enabling DCR, frequent lamp mode switching
may shorten lamp life and noise level will vary during
operation.
Audio Settings See "Adjusting the sound" on page 45 for details.
4. SYSTEM SETTING: BASIC menu
5. SYSTEM SETTING: ADVANCED menu