Filter
Top Products
15
ViewSonic
MENU
LAMP
SOURCE
TEMP
Powering On the Projector
1. Remove the lens cap.
2. Securely connect the power cord and signal cable. When connected, the Power
LED will ash red.
3. Turn on the lamp by pressing “
” button on the control panel or on the remote
control. The Power LED will turn blue.
4. Turn on your source that you want to display on the screen (computer, note-
book, video player, etc). The projector will detect the source automatically and
will display on the screen.
5. If you connected multiple sources at the same time, press the “Source” button
on the remote control to switch between inputs.
Powering On/Off the Projector
ViewSonic
MENU
LAMP
SOURCE TEMP
2
1
Enter
Freeze
HDMI PC
SD/USB
Video
Menu
My
Button
Exit
Color
Mode
Source
Blank
Aspect
Auto
Sync
Magnify
Power Laser
or
2