Filter
Top Products
27
Use this option to enable/disable input sources. Press ► button to enter the sub
menu and select which sources you require. Press the “Enter” button to nalize the
selection. The projector will not search for inputs that are not selected.
SD card and USB A are not in the auto source route, please manually select them.
`
USB Display (display over USB) can be easily operated to project a computer's
screen by using a single USB cable (mini B type to A type) without any other
drivers.
1. Choose source: Press the “PC” button on the remote control to choose
source from the mini USB connector.
2. Connection: Connect the USB cable to the mini USB of projector and USB
type A of the computer.
3. Automatically projected: When detecting the computer, the screen will be
automatically projected out.
4. End the projection: When unplugging the USB cable, the projection will be
stopped.
Only one computer can be connected at one time.
PICTURE | Advanced | Input