Filter
Top Products
Setup
21
NET
Browse shared network volumes via SAMBA protocol when this device is connected to
network.
UPNP
Browse media files in a UPnP AV MediaServer in the same LAN with this device.
Playing Media Files from HDD/USB
1. Select a location to browse for the media file you want to play. Select HDD if the file is
saved on the internal HDD or USB if the file is located on an external USB device
connected to this device.
2. Browse to the folder containing the media file you want to play (use the cursor buttons
on the remote control to navigate through listed folders; press the
ENTER button
to open a folder or subfolder).
3. Select a media file and press the
ENTER button to start playback.
Playing Media Files from NET
You can use this device to play media files from your network on your TV.
1. Connect this device to your home network.
2. From the Home Menu, select NET and press the
ENTER button.
3. The NET menu will show volumes available on your network. Use the cursor buttons on
the remote control to browse and to select media files you want to play.
Note:
If you need to enter a username and password to login to a network volume,
press the
ENTER button on the remote control. This will bring up a
virtual keyboard on the TV display. Use the remote control cursor buttons and
the
ENTER button to select the necessary characters. The password can
use any combination of numbers and letters (lower case or caps). It can also
use periods. It cannot use extended punctuation characters (such as !, @, #, $,
%, &, etc.)
Playing Slideshow/Music Slideshow
1. Select the image file you want to start the slideshow, then press the ENTER
button. This device will display all photo images in the folder consecutively with the
selected display interval.
2. To set the display interval for your slideshow, select Setup in the Home Menu to
access the Setup Menu. Select Misc → Slideshow Interval, and select the time you
want each photo to display. (page 23)
9LHZ6RQLF 903