Filter
Top Products
Quick Start
4
Quick Start
Read before use.
1. Do not operate electronics with wet hands.
2. Do not operate this device in a bathroom or near water.
3. Do not bend cables in a sharp angle.
4. Keep this device and cables out of reach of children.
5. Keep this device and its accessories away from heat sources.
How do I use this device?
This device plays media contents stored in its internal HDD, in an external USB storage
connected to it, or on a server via SAMBA Ethernet protocol. In the Home Menu, select the
mode and the medium you want to browse, and then press the
ENTER button to start
playback.
How do I copy media files into it?
1. Connect the AC adapter to this device.
2. Connect this device to your computer with the USB cable.
3. Press the Power Switch on the front panel to turn on this device.
4. Copy files just like using a USB external HDD. (No additional software is needed!)
5. Disconnect this device from your computer using safe remove procedure of your OS.
How do I play media files on my TV?
1. Connect this device to your TV with correct cables.
2. Plug the AC adapter into the Power Connector.
3. Press the Power Switch on the front panel to turn on this device.
4. Press the
STANDBY button on the remote control to activate this device.
5. Browse with the cursor buttons and the
ENTER button.
What if my TV screen displays unstable image?
Press the TV SYS button repeatedly until the image goes steady. (This only works at startup)
What if my USB wireless dongle does not work?
This device works with certified USB wireless dongles only. Please consult your local
distributor to purchase a certified USB wireless dongle. Please refer to Connecting
Wireless for more information. (page 7)
How to configure settings?
Select and enter the SETUP option in the Home Menu.
9LHZ6RQLF 903