Filter
Top Products
14 VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE
3. Click the PaperPort Software button and follow the instructions
on the screen.
After the PaperPort software is installed on your computer, you can
click the appropriate buttons on the CD to install the other
applications on the CD or print the PaperPort User’s Guide.
4. When you’re finished installing the software, remove the CD from
the CD drive and store the CD in a safe place.
5. Restart the computer. The scanner’s on/off light turns green
indicating that the computer and scanner are communicating.
That completes the installation. Please see “Checking Out Your
Scanner” on page 14 to continue setting up your OneTouch scanner.
CHECKING OUT YOUR SCANNER
The OneTouch scanner software adds the scanner icon to the Windows
taskbar (at the bottom right corner of the computer screen). If the
scanner is properly connected, the scanner icon looks like the one in this
figure.
If the icon has a red X through it, the scanner is not properly connected.
See the next section, “If the Scanner Is Not Properly Connected,” for
the steps to fix the problem.
Note: If the PaperPort CD does not automatically start, make sure
the CD drive’s door is completely shut. If the CD still doesn’t start,
the Autorun option on your computer is turned off. Click the
Windows icon named My Computer. The window shows the drives
available on your computer. Double-click the icon for your
CD-ROM drive to see the list of files on the CD. Double-click the
file named START32.EXE. The CD starts.
Scanner Icon