Filter
Top Products
THE VISIONEER ONETOUCH 8920 SCANNER
3
Document cover. Close the document cover after placing items on the scanner glass.
Pressure plate. Helps to secure paper documents in place on the scanner glass. Also protects
the transparency light source. Before scanning 35mm slides and negative transparencies,
unsnap and remove the pressure plate to uncover the transparency light source.
Transparency light source. Shines light down through the glass onto the scanning sensors in
the body of the scanner.
Glass. Place items face down on top of the glass in the upper left corner.
Reference frame. Place items face down within this frame. Markings on the border of the
frame show where to align various paper sizes.
OneTouch buttons panel. Press a OneTouch button to scan, copy/print, email, fax, OCR
(convert items to text), or scan with custom settings.
Status light. Shows the scanner’s status. Green light: scanner is on and ready to scan. Orange
light: scanner is busy.
On/Off switch. Turns the scanner’s power on and off.
Power jack. Plug the scanner power cord into this jack.
TPA (Transparency Adapter) cable. Supplies power from the scanner body to the
transparency light source.
TPA (Transparency Adapter) port. If the TPA cable is unplugged or loose, plug it into this
port.
USB port. Plug one end of the USB cable into this port; plug the other end into a USB port
on the computer, keyboard, or USB hub.