Filter
Top Products
www.vxitech.com
CT-100C Installation 21
SECTION 2
INSTALLATION
INTRODUCTION
When the CT-100C is unpacked from its shipping carton, the contents should include the
following items:
(1) CT-100C Six-Slot Chassis
(1) CT-100C Module User’s Manual (this manual)
(1) Power cord
All components should be immediately inspected for damage upon receipt of the unit.
BACKPLANE
The CT-100C mainframe has a jumper-less, auto-configurable backplane using active-automatic
daisy chaining for the VME Interrupt acknowledge and bus grant daisy chain signal lines. This
eliminates the need to manually configure the backplane and insures that these signals are
properly configured at all times.
The power cord is the only way to disconnect the CT-100C mainframe from ac power.
Therefore, the power cord must be accessible to the operator at all times. When the CT-
100C mainframe is mounted in a system rack, the power cord need not be accessible since
the rack must have its own disconnect device.
Le cordon de secteur est la seule manière de démonter l’unité centrale de CT-100C du
courant alternatif Par conséquent, le cordon de secteur doit être accessible à l’opérateur à
tout moment. Quand l’unité centrale de CT-100C est montée dans un support de système, le
cordon de secteur n’a pas besoin d’être accessible puisque le support doit avoir son propre
dispositif de débranchement.