www.vxitech.com
CT-100C Service Information 37
SECTION 3
SERVICE INFORMATION
INTRODUCTION
There are no operating instructions required for the CT-100C VXIbus chassis. After the chassis is
installed, operation is completely transparent to the operator. Just plug in the instruments then
power up the chassis.
NOTE Service should only be performed by qualified personnel.
Le service devrait seulement être assure par le personnel qualifié.
REPLICABLE PARTS LIST
The following table lists the parts that can be replaced on the CT-100C chassis.
Description Part Number
Final Assembly, Power Supply Replacement Kit, CT-100C 70-0271-000