Support User Manuals

Wasp Bar Code WPL606 Printer User Manual

Open as PDF

of 22

4. Calibration

There are two power-on button combinations to initialize the printer settings

and to calibrate sensors on the W606.

4.1 Printer Initialization

Printer Initialization will restore printer settings to defaults. Do this if labels are

printing incorrectly and all other solutions have failed to solve the problem.

Default settings:

Item Default Value

Cleared by

Initialization

Property Saved

when Turning off

Power

Mileage N/A No Yes

Check Sum N/A No Yes

Serial Port 9600,n,8,1 Yes Yes

Code Page 850 Yes Yes

Country Code 001 Yes Yes

Tear Mode On Yes Yes

Peel Mode Off Yes Yes

Cutter Mode Off Yes Yes

Offset 0 Yes Yes

Reference Point 0,0 Yes Yes

Print Direction 0 Yes Yes

Speed 4 IPS Yes Yes

Density 08 Yes Yes

Label Size 3”x3” (77X77mm) Yes Yes

Gap/Bline Sensor Gap Sensor Yes Yes

Gap(Bline) 0.12” (3 mm) Yes Yes

Transparency 17 Yes Yes

Ribbon Sensor

Sensitivity

1 Yes Yes

LCD Language English Yes Yes

Aux. LED Off Yes Yes

Aux. Buzzer Off Yes Yes

Download Files N/A No Yes

RTC N/A No No

previous next