Filter
Top Products
APPENDIX
99
WD SENTINEL RX4100
ADMINISTRATOR AND MAINTENANCE GUIDE
Removing the Unit Front Cover
1. Before getting started, shut down the server and disconnect all external connections.
2. Place the unit on a clean and stable surface, with the front of the unit facing you.
3. On the top of the unit, release the two (2) screws closest to you and two (2) screws
toward the top middle of the unit (Figure 6).
Figure 6. Remove unit front screws
4. Push the unit cover away from you to release the cover, then lift it away from the unit
(Figure 7).
Figure 7. Remove unit front cover