Filter
Top Products
/F Set System Parameters
Displays a menu which is used to define the Site ID message and Supervisor Password. When
the Supervisor Password is defined, the APS will display a password prompt before allowing
access to command mode. For more information, refer to Section 5.4.
Note: Make certain to record your Supervisor Password for future reference. If the
Supervisor Password is lost or forgotten, you will not be able to access Supervisor
Level commands.
Availability: Supervisor Only
Format: /F [Enter]
Response: Displays System Parameters Menu
/H Help
Displays a Help Screen, which lists all APS commands along with a brief description of each
command.
Availability: Supervisor / User
Format: /H [Enter]
Response: Displays Help Screen. Note that the User Level Help Screen does not include
Supervisor Level Commands.
/I Default and Test
Tests internal memory and initializes the unit with the default parameters specified by the
SetUp Switches.
CAUTION: When /I is invoked, the APS will revert to the parameters
specified by the SetUp Switches. Command selected parameters will be lost.
Availability: Supervisor Only
Format: /I[/Y] [Enter]
Where /Y is a command option used to suppress the "Sure?" prompt.
Response:
Verbose: "Are You Sure (y/n)?", if Y, memory test and initialization begins.
Terse: 5, if Y, memory test and initialization begins.
/J Display Site ID
Displays the user-defined Site I.D. message.
Availability: Supervisor / User
Format: /J [Enter]
Response: Displays Site I.D. Message
9-7