Filter
Top Products
IN-LINE STAPLER FINISHER USER GUIDE 3
Overview
Figure 1: Xerox DocuColor 12 with a Finisher/Mailbox
The In-line Stapler Finisher is an optional accessory for the Xerox DocuColor 12 and
Document Centre ColorSeries 50 copier/printers. It attaches to the right side of the copier/
printer, as shown in Figure 1. The In-line Stapler Finisher will be referred to as the Finisher
in the remainder of this guide.
The Finisher provides stapling capability for print jobs. It can staple from 2 to 50 sheets of
a single paper size or selected mixed paper sizes. It offers both single and dual stapling
choices. Stapling options are selected from the printer properties window of the
application used to print the job. All stapled sets are delivered to the Finisher Output Tray.
The Finisher Output Tray offsets the output for easy retrieval.
In addition to the Finisher Output Tray, the Finisher has 10 top bins and a Center Output
Tray. The accessibility of the bins and trays depends on how the Finisher has been
configured, the mode of operation, and the options selected for the job.
At installation, the Finisher is configured as either a Finisher/Mailbox or a Finisher/Sorter.
This configuration determines how the 10 top bins function. The stapling option is
available with either configuration. You must contact your Xerox Service Representative to
switch between the Finisher/Mailbox and Finisher/Sorter configurations.