Filter
Top Products
Xerox Document Centre 440/432/430/426/425/420 User Guide Page 11-13
Setups
Power Save (Auto Off)
This function is dependant on the machine configuration.
Power Save/Sleep Mode (Auto
Off/Sleep)
60 minutes after the last copy or print out, the machine will
automatically switch into Power Save/Sleep (Auto Off) Mode.
If the DC426/420 is not connected to a network, the machine
switches the Power ON/OFF switch to the off position. Any
stored jobs remain in the memory and the DC426/420 returns
to an operational condition when powered on.
NOTE: If Low Power is set higher than Power Save/Auto Off,
the machine displays a message that Low Power cannot
exceed Power Save/Auto Off.
Contention
Select Contention to set up Interrupt and/or the Print Queue
Priority option.
¾ Select [Power Save] or
[Auto Off].
¾ Use the scroll buttons to
select the desired timeout
period.
¾ Select [Save].
¾ Select [Contention].
¾ Select any button to change
the setting - a description of
each follows.
¾ Make changes as required.
¾ Select [Save] to continue.