Filter
Top Products
INTRODUCTION TO THE GRAPHICAL USER INTERFACE
1-18 XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Setup and status information
The following system setup and status information is displayed in the
right column of the IPS main window:
Control Unit Configuration section Displays the current configuration of the system. Items that appear
here include:
Figure 1-18. Control Unit Configuration section of main window
• Highlight Color — Displays the color dry ink installed in the
printer.
• Resolution — Shows the resolution in dpi of the fonts used in
the current or most recent job sent to the IPS. This field reflects
the value entered on the Resolution window, accessible through
the Configuration pull-down menu.
• Rotation — Indicates whether Continuous Forms Emulation is
enabled.
• Privilege Mode — Indicates the current Privilege Mode
(Service, Administrator, Operator, or User).
Note: When a remote Shell is activated, “Remote Shell Active”
displays on the window.
When a remote Shell is activated and a service representative dials
in remotely, “Remote Session Active” displays on the window.
For information on activating a remote shell, refer to the “Setting up
the printer controller” chapter, “Enabling or disabling the modem”
section.