MEDIA
XEROX WIDE FORMAT 510dp OPERATOR MANUAL 17
Automatic media roll switching
The printer has an automatic roll-switching feature that allows it to
switch to another roll when the roll in use empties. This feature
provides for longer continuous operation of the printer.
Automatic switching is possible only if the following conditions are
met:
• The printer has more than one drawer.
• Another drawer contains a media roll of the identical size and
type as the roll in use.
• The print job has not specified a particular roll (e.g., roll 1).
If both of the remaining media drawers contain the identical media
size and type as the roll is in use, the printer will select the lowest
numbered drawer first. If, for example, roll 3 empties and both roll
1 and roll 2 contain the same media size and type, the printer will
switch to roll 1. If roll 1 empties, the printer will switch to roll 2.
Media storage tips
To obtain maximum results from your print media, follow these
media storage tips:
• Store cut sheet media flat, not on edge, in a closed cut sheet
media package.
• Store roll media on end in an appropriately sealed media bag.
• Store the media in a cool dry environment.