Filter
Top Products
Troubleshooting
Phaser 6700 Color Printer 113
User Guide
Probable Causes Solutions
The Date and Time Setup is set to Manual
(NTP Disabled).
Change the Date and Time to Automatic by enabling
NTP. Enable NTP using CentreWare Internet Services:
1. Open your Web browser, type the IP address of your
printer in the address field, then press Enter or
Return.
Note: If you do not know the IP address of your printer,
see Finding the IP Address of Your Printer on page 20.
2. Click the Properties tab.
3. In the navigation pane, click the arrow to the left of
General Setup.
4. From the expanded General Setup menu, select Date
and Time.
5. In the Date and Time page, click the arrow at the
right of the Date and Time Setup box.
6. Select Automatic using NTP.
7. In the NTP Server Settings, enter the IP address for
the NTP server.
8. Click Apply.
The time zone, date, or time is set incorrectly. Set the time zone, date, and time manually:
1. At the control panel, touch Printer.
2. Touch the Tools tab, then touch Setup.
3. Touch General Settings > Date/Time.
4. Change information as needed:
a. Touch Time Zone, then use the Up and Down
Arrows to select your geographic region and time
zone, then touch OK.
b. Touch Date, then use the Left and Right Arrows
to select the year, month, and day, then touch OK.
c. Touch Time, then touch Hour or Minutes. Use the
keypad to enter the numbers, touch AM or PM,
then touch OK.