Filter
Top Products
USER MODES
58 XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
User Mode 6 (Detack Lamp Control Mode) “U6”
If the print quality of prints made on Film media lack sharpness or
have a light overall appearance, a Detack Lamp in the print
process can be switched OFF using Mode 6. This action
increases the amount of Toner transferred to the print.
NOTE: If a higher than normal jam rate is experienced, the Detack
Lamp may have to be switched on again.
1. With the printer in the Standby (idle) condition, press the
[Menu] Key 6 times to enter Mode 6.
The [Menu] Key lights and the display indicates “U6” on the left
side of the display and the current setting on the right side.
2. Press [Enter]
3. Press the [ ® or ¬ ] key to change the value to 0 (OFF)
The value in the display will change to 0 (OFF)
The range is 1 – On and 0 - Off
NOTE: Factory default is “0”, Off.
4. Press the [Online] Key to exit the User Mode.
Menu
Enter Online
Press [Menu] 6 times
.
Menu
Enter
Online
Menu
Enter Online
Menu
Enter Online