Filter
Top Products
DOCUCOLOR 12 USER GUIDE 13–9 PROBLEM SOLVING
1
3
4
5
6
7
13
If the paper jam is in the Fuser Exit area, locate
the Fuser Exit Area handle at the right of the
Paper Path Module, as illustrated in Figure 12.
Move the handle to the right and carefully remove
the jammed paper. Gently secure the handle back
into place.
6
In the Duplex Path, areas 3 and 4, press the
handles down gently to release the Aligner Baffle
(left handle) and Duplex In baffle (right handle), as
illustrated in Figure 13.
7
Remove the jammed paper and secure the
handles back in place.
8
Firmly push in the Paper Path Module until it is in
place. Turn the green handle counterclockwise to
lock the module, as illustrated in Figure 14.
Figure 12: Fuser Exit area
Figure 13: Duplex Path Areas
Figure 14: Rotating the green handle
counterclockwise
Area 3
Area 4