Filter
Top Products
1.21
Installing Optional Memory
Go to the back of the printer. Turn the
printer off and disconnect the power cord
and printer cable.
Remove the two outer screws and the
control board cover.
Install the memory SIMM, at a slight angle,
into the slot labeled “DRAM Module”.
INSTALLING OPTIONAL MEMORY
1
2
3
Note: For users who plan to run complex
print jobs or print a majority of print jobs
at 1200dpi, a minumum of 8MB of
additional memory is recommended.
Memory needs to be purchased separately.
(RAM Specifications: 72 pin, EDO, non-
parity: 60ns.)
Caution: The controller board and internal
options are sensitive to static electricity.
Before installing or removing an internal
option, discharge static electricity from your
body by touching something metal, such as a
metal plate on a device connected to a
grounded outlet.
User Guide
EN
FR
ES
PT
ZH
P1210UG-8 6/30/00 3:59 PM Page 1.21