Filter
Top Products
User Guide
1.22
INSTALLING OPTIONAL MEMORY
Push back on the SIMM until it clicks into
place. (Make sure the SIMM is secured in
place by the metal clips.)
Replace the side cover and tighten the two
outer screws.
Reconnect the power cord and printer cable.
Turn the power on.
Print a configuration sheet (hold down the
print button until all lights blink, then
release). Confirm the new memory value
on your sheet.
4
5
6
7
P1210UG-8 6/30/00 3:59 PM Page 1.22