Filter
Top Products
User Guide
1.4
CONNECTIONS/CONTROL PANEL
USB Cable
Connect cable.
(Sold separately)
or
AC Power Cord
Connect to your printer to a
properly grounded outlet.
Turn the power on.
1
2
Connections
Control Panel
Cancel Button
To cancel print job, hold the cancel
button until all lights blink, then release.
Print Button
To print a Configuration Sheet, hold the print
button until all lights blink, then release.
Error Light
Blinking: Insufficient memory
On: Cover open, cartridge not installed or
not seated properly
On with Paper Light: Paper jam
Manual Light
On: Multi-purpose tray
(manual feed) ready
Press print button to start job
Paper Light
On: Out of Paper
On with Error Light: Paper jam
Data Light
On: Ready to receive data
Slow blink: Receiving data
Fast blink: Printing
Note:When all lights are
blinking, this indicates a system
error. Turn the power off and
then back on to clear. If problem
persists, call your local Xerox
Helpline.
Parallel Cable
Connect cable.
Caution: Turn off your computer
before connecting your printer
cable or power cord.
P1210UG-8 6/30/00 3:59 PM Page 1.4